Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: https://ea.donntu.edu.ua/jspui/handle/123456789/22625
Назва: ВИЗНАЧЕННЯ ТЕРМІНУ ПРОХОДЖЕННЯ СТРУМОМ ДВОХ ФІКСОВАНИХ РІВНІВ ЯК СПОСІБ ПРИСКОРЕННЯ ФУНКЦІЇ МАКСИМАЛЬНОГО СТРУМОВОГО ЗАХИСТУ
Інші назви: Estimation of the Time of Current Travelling through Two Fixed Levels as a Way of Accelerating the Functions of Overcurrent Protection
Определение времени прохождения током двух фиксированных уровней как способ ускорения функции максимальной токовой защиты
Автори: Маренич, К.М.
Marenych, K.N.
Маренич, К.Н.
Ключові слова: шахта
электротехнический комплекс
короткое замыкание
электрический ток
параметр
измерение
устройство защиты
mine
electrotechnical complex
electrical short circuit
electrical current
parameter
measurement
device of protection
електротехнічний комплекс
коротке замикання
електричний струм
вимірювання
пристрій захисту
Дата публікації: 2013
Видавництво: Донецький національний технічний університет
Бібліографічний опис: Наукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 2 (25). - Донецьк, ДонНТУ, 2013. С - 27-33
Короткий огляд (реферат): Досліджені і проаналізовані параметри електричної мережі при виникненні трифазного короткого замикання в електротехнічному комплексі шахтної дільниці, визначений можливий інформаційний параметр, що дозволятиме підвищити швидкодію виявлення процесу короткого замикання.
Опис: A modern mine is an energy-intensive enterprise in which all the processes are electrified. The modern protection against short circuits is based on the method of measuring a parameter proportional to the electric current in the consumer’s cable, comparing this value with the maximum allowed and turning off the network, if the measured value is higher than the maximum parameter. The short circuit in the power supply has a high risk of fire or methane-air mixture explosion in the atmosphere. Improvement of technological equipment is a prerequisite for increasing cross sections of cables, increasing the power transformers. Therefore, the properties of the power to limit the short circuit current are reduced. The problem of limiting the thermal overload in case of short circuit can be solved by reducing the duration of identifying and disabling this dangerous process. From here follows the need for high-speed methods of detecting short circuits in electric power networks. An analysis of electric system, based on the measurement of the phase between the current and voltage, the speed of current increase in a mine electrical system and the combination of these methods is interesting.
URI (Уніфікований ідентифікатор ресурсу): http://ea.donntu.edu.ua/handle/123456789/22625
ISSN: 2075-4272
Розташовується у зібраннях:Випуск 2 (25)'2013
Статті кафедри ГЕА

Файли цього матеріалу:
Файл Опис РозмірФормат 
маренич.pdf589,17 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.