Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: https://ea.donntu.edu.ua/jspui/handle/123456789/22625
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorМаренич, К.М.-
dc.contributor.authorMarenych, K.N.-
dc.contributor.authorМаренич, К.Н.-
dc.date.accessioned2013-09-17T09:59:50Z-
dc.date.available2013-09-17T09:59:50Z-
dc.date.issued2013-
dc.identifier.citationНаукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 2 (25). - Донецьк, ДонНТУ, 2013. С - 27-33en_US
dc.identifier.issn2075-4272-
dc.identifier.otherУДК 621.317.61:622.012.2-
dc.identifier.urihttp://ea.donntu.edu.ua/handle/123456789/22625-
dc.descriptionA modern mine is an energy-intensive enterprise in which all the processes are electrified. The modern protection against short circuits is based on the method of measuring a parameter proportional to the electric current in the consumer’s cable, comparing this value with the maximum allowed and turning off the network, if the measured value is higher than the maximum parameter. The short circuit in the power supply has a high risk of fire or methane-air mixture explosion in the atmosphere. Improvement of technological equipment is a prerequisite for increasing cross sections of cables, increasing the power transformers. Therefore, the properties of the power to limit the short circuit current are reduced. The problem of limiting the thermal overload in case of short circuit can be solved by reducing the duration of identifying and disabling this dangerous process. From here follows the need for high-speed methods of detecting short circuits in electric power networks. An analysis of electric system, based on the measurement of the phase between the current and voltage, the speed of current increase in a mine electrical system and the combination of these methods is interesting.en_US
dc.description.abstractДосліджені і проаналізовані параметри електричної мережі при виникненні трифазного короткого замикання в електротехнічному комплексі шахтної дільниці, визначений можливий інформаційний параметр, що дозволятиме підвищити швидкодію виявлення процесу короткого замикання.en_US
dc.publisherДонецький національний технічний університетen_US
dc.subjectшахтаen_US
dc.subjectэлектротехнический комплексen_US
dc.subjectкороткое замыканиеen_US
dc.subjectэлектрический токen_US
dc.subjectпараметрen_US
dc.subjectизмерениеen_US
dc.subjectустройство защитыen_US
dc.subjectmineen_US
dc.subjectelectrotechnical complexen_US
dc.subjectelectrical short circuiten_US
dc.subjectelectrical currenten_US
dc.subjectparameteren_US
dc.subjectmeasurementen_US
dc.subjectdevice of protectionen_US
dc.subjectелектротехнічний комплексen_US
dc.subjectкоротке замиканняen_US
dc.subjectелектричний струмen_US
dc.subjectвимірюванняen_US
dc.subjectпристрій захистуen_US
dc.titleВИЗНАЧЕННЯ ТЕРМІНУ ПРОХОДЖЕННЯ СТРУМОМ ДВОХ ФІКСОВАНИХ РІВНІВ ЯК СПОСІБ ПРИСКОРЕННЯ ФУНКЦІЇ МАКСИМАЛЬНОГО СТРУМОВОГО ЗАХИСТУen_US
dc.title.alternativeEstimation of the Time of Current Travelling through Two Fixed Levels as a Way of Accelerating the Functions of Overcurrent Protectionen_US
dc.title.alternativeОпределение времени прохождения током двух фиксированных уровней как способ ускорения функции максимальной токовой защитыen_US
dc.typeArticleen_US
Розташовується у зібраннях:Випуск 2 (25)'2013
Статті кафедри ГЕА

Файли цього матеріалу:
Файл Опис РозмірФормат 
маренич.pdf589,17 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.