Please use this identifier to cite or link to this item: https://ea.donntu.edu.ua/jspui/handle/123456789/28053
Title: ПІДВИЩЕННЯ ТОЧНОСТІ ВИМІРЮВАННЯ РІЗНИЦІ ПОТУЖНОСТЕЙ ВИПРОМІНЮВАНЬ
Other Titles: Повышение точности измерения разности мощностей излучений.
Increasing the accuracy of measuring the difference in radiation power.
Authors: В.П. Куценко, V.P. Kutsenko
К.Л. Шевченко, K.L. Shevchenko
Keywords: вимірювання
measurement
НВЧ-електромагнітні випромінювання
microwave electromagnetic radiation
диференціальні модуляційні радіометричні системи
differential modulation radiometric system
підвищення точності
improving the accuracy
різниця потужностей
difference capacities
Issue Date: May-2015
Publisher: Донецький національний технічний університет
Citation: Наукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 1 (28). - Красноармійськ, ДонНТУ, 2015.
Series/Report no.: Наукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 1 (28). - Красноармійськ, ДонНТУ, 2015. - C. 141-147.;
Abstract: Запропоновано для вимірювання різниці потужностей слабких НВЧ-електромагнітних випромінювань на тлі інтенсивних шумів використовувати диференціальні модуляційні радіометричні системи в бездетекторному варіанті. Показано, що чутливість бездетекторної схеми радіометричної системи покращується в 3 – 4 рази порівняно з детекторною схемою, і в 2 – 2,5 рази порівняно з супергетеродинним перетворенням частоти НВЧ-сигналів. Рівень корисного шумового сигналу знизився з 10 – 30% від потужності внутрішніх шумів схеми диференціальної модуляційної радіометричної системи до 0,05 – 0,10%.
Description: We propose to use differential modulation radiometric systems for measuring the difference between the capacities of weak microwave electromagnetic radiation on the background of intensive noise. In the differential system the ratio "signal - noise" at its input is much less than unity (0.005 - 0.5). Under such conditions, a quadratic detector severely limits its sensitivity. In this connection the task is a significant increase in sensitivity and resolution, which will improve the accuracy of measuring the difference in power of low-intensity electromagnetic radiations using the functional diagram of a differential system in the form without detector. The absence in the scheme of square-law detector eliminated the effect of suppressing the useful signal from the noise from compared electromagnetic radiation by interference in the form of intrinsic microwave noise of the receiver path and the frequency converter. The result is increased sensitivity to the difference of electromagnetic radiation, a decrease in sensitivity threshold and the accuracy of weak electromagnetic radiation measurement. The reduction of fluctuation sensitivity threshold is due to the exclusion from the scheme of differential modulation of a selective low-frequency amplifier and a synchronous detector. The fact is that with the narrow bandwidth selective CFP (which is necessary to suppress the low frequency noise) the fluctuations of voltage amplitude of modulated signal bypass increase due to the instability of low frequency oscillator frequency. Synchronous detector points out these fluctuations in the form of infra-low frequency voltage, which drastically reduces the fluctuation threshold of a differential system. Therefore, the exclusion from the scheme of both quadratic and simultaneous detector greatly increases the sensitivity of the circuit. Thus, the proposed scheme without detector has increased sensitivity and accuracy that allow detecting and measuring small gradients of electromagnetic radiation. Studies have shown that the sensitivity of the detectorless circuit is improved by 3 - 4 times as compared to the detector circuit, and by 2 - 2.5 times as compared with the superheterodyne frequency conversion of RF signals. Utility level of the noise signal has fallen from 10 - 30% of the capacity of the internal noise of the differential modulation scheme of the system to 0.05 - 0.10%. Output voltage is greater than 25 - 30 dB if compared to the detection circuit due to increasing by the differential amplifier of the difference in constant components of videopulses that are "clogged" with the products of intrinsic noise transformation with noise signals of receiving antennas.
URI: http://ea.donntu.edu.ua/handle/123456789/28053
ISSN: 2075-4272
Appears in Collections:Випуск 1(28)

Files in This Item:
File Description SizeFormat 
Npdntu_ota_2015_1_19.pdf203,38 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.