Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: https://ea.donntu.edu.ua/jspui/handle/123456789/28059
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorР.И. Соломичев, R.I. Solomichev-
dc.contributor.authorА.В. Вовна, A.V. Vovna-
dc.contributor.authorА.А. Зори, А.А. Zori-
dc.date.accessioned2017-03-07T07:16:20Z-
dc.date.available2017-03-07T07:16:20Z-
dc.date.issued2015-05-
dc.identifier.citationНаукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 1 (28). - Красноармійськ, ДонНТУ, 2015.uk_UA
dc.identifier.issn2075-4272-
dc.identifier.urihttp://ea.donntu.edu.ua/handle/123456789/28059-
dc.descriptionExisting aspiration samplers do not satisfy to modern standards and control requirements of coal mines haze in speed, accuracy and ability to measure automatically. In contrast to single-beam method in which it is impossible to assess the current dust aerosol dispersion, through the two-beam method determining the nature of radiation attenuation for a particular wavelength of a certain particle size causes obtaining experimental data for restoring the function of particle size distribution, as well as the determination of the suspended dust mass concentration. However, devoid of such deficiencies the optical absorption method for measuring the concentration of suspended dust particles has a significant temperature dependence of the LED emission intensity at a constant amplitude voltage that causes the dominant contribution to the dust measurement error, along with significant destabilizing factors such as sight glasses dustiness and humidity of mine air. The laboratory tests of the two-beam model sample coal dust concentration and dispersion meter were provided without zero temperature drift compensation. The experimentally obtained characteristics were investigated of the output voltage normalizing converters, the additional absolute error of dust concentration measurement caused by temperature drift was established, which make up for the first channel (the wavelength λ1 = 470 nm) ± 25 mg/m3; for the second channel (λ2 = 624 nm) ± 76.6 mg/m3 in the temperature range of +16 to +40 °C, which does not satisfy the set requirements for accuracy. In order to ensure the required accuracy temperature compensation method was improved, which was developed on the basis of a two-beam model sample of coal dust concentration and dispersion meter, which has significantly improved light-emitting diodes thermal instability compensation. To provide the LEDs thermal instability compensation we suggest to enter in the measuring instrument scheme the closed channel with additional temperature compensation, and for measuring instrument realization with extended functional capabilities – the dust dispersion determining, it is proposed to combine the open optical channel of two measuring cells with different wavelengths radiation in one. The additional absolute errors of dust concentration measurement was established in this case for the first channel were ± 13 mg/m3; for the second channel ± 11.3 mg/m3, respectively by 1.9 and 6.7 times less than the two-beam dust concentration measuring instrument without temperature compensation in the concentration measurement range from 0 to 3 g/m3.uk_UA
dc.description.abstractПроведенные лабораторные испытания макетного образца измерителя концентрации и дисперсности угольной пыли без температурной компенсации позволили установить существенный температурный дрейф его выходного напряжения в диапазоне изменения температуры от +16 до +40 °С. Усовершенствован способ компенсации температурного дрейфа нуля двулучевого измерителя концентрации и дисперсности угольной пыли, получена оценка его метрологических характеристик, подтверждающая существенное повышение точности измерений: для первого канала в 1.9, а для второго в 6.7 раза в диапазоне измерения концентрации от 0 до 3 г/м3.uk_UA
dc.language.isootheruk_UA
dc.publisherДонецький національний технічний університетuk_UA
dc.relation.ispartofseriesНаукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 1 (28). - Красноармійськ, ДонНТУ, 2015. - C. 171-180.;-
dc.subjectконцентрацияuk_UA
dc.subjectconcentrationuk_UA
dc.subjectабсорбцияuk_UA
dc.subjectabsorptionuk_UA
dc.subjectтемператураuk_UA
dc.subjecttemperatureuk_UA
dc.subjectизмерительuk_UA
dc.subjectmeasuring instrumentuk_UA
dc.subjectаппроксимацияuk_UA
dc.subjectapproximationuk_UA
dc.titleПОВЫШЕНИЕ ТОЧНОСТИ ОПТИКО-АБСОРБЦИОННОГО ИЗМЕРИТЕЛЯ КОНЦЕНТРАЦИИ УГОЛЬНОЙ ПЫЛИuk_UA
dc.title.alternativeПідвищення точності оптико-абсорбційного вимірювача концентрації вугільного пилу.uk_UA
dc.title.alternativeImproving the accuracy of optical absorption of coal dust concentration meter.uk_UA
dc.typeOtheruk_UA
Розташовується у зібраннях:Випуск 1(28)

Файли цього матеріалу:
Файл Опис РозмірФормат 
Npdntu_ota_2015_1_23.pdf265,39 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.