Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: https://ea.donntu.edu.ua/jspui/handle/123456789/22897
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorКузнецов, Д.Н.-
dc.contributor.authorЧупис, Д.А.-
dc.contributor.authorРуденко, А.С.-
dc.contributor.authorKuznetsov, D.N.-
dc.contributor.authorChupis, D.A.-
dc.contributor.authorRudenko, A.S.-
dc.contributor.authorКузнецов, Д.М.-
dc.contributor.authorЧупіс, Д.А.-
dc.date.accessioned2013-09-24T08:46:37Z-
dc.date.available2013-09-24T08:46:37Z-
dc.date.issued2013-
dc.identifier.citationНаукові праці Донецького національного технічного університету. Серія: Обчислювальна техніка та автоматизація. Випуск 2 (25). - Донецьк, ДонНТУ, 2013. С - 225-231en_US
dc.identifier.issn2075-4272-
dc.identifier.otherУДК 53.088-
dc.identifier.urihttp://ea.donntu.edu.ua/handle/123456789/22897-
dc.descriptionThe main goal of this work is constant temperature hot-wire anemometer design and investigation for measuring the fine structure of turbulent gas flows of specialized aerodynamic test benches. Heat loss anemometer is built under classic bridge circuit. Detector sensing element is produced of the 8 micron tungsten wire. Anemometer’s measuring amplifier is implemented using three operational amplifiers, thus ensuring a high gain, high input impedance and good interference rejection. Using the discrete operational amplifiers allows realizing the matching of the passive elements for the optimal circuit parameters ensuring. Particularly, possibility of the device frequency correction is realized. Distinctive feature of the designed anemometer is using of the FET with low drain-source impedance and high switch frequency in the feedback circuit. This allows increasing the measuring circuit frequency characteristic. Methodology of the anemometer’s initial tuning, including direct current balancing and frequency characteristic correction, is given. Results of the full-scale test allows evaluating the time electric constant of the anemometer’s measuring circuit, which was 20 μs, thus permitting the required band of 20-30 kHz. An improved anemometer’s heat balance equation and calibrating coefficients calculation methods are proposed for the experimental calibration data approximation accuracy increasing. Consequently, it was established that improved heat balance equation provide increasing of the experimental calibration data approximation accuracy at the average by 1,7 times.en_US
dc.description.abstractПредложена принципиальная схема и методика начальной настройки ниточного термоанемометра постоянной температуры для измерений тонкой структуры турбулентных газовых потоков. Приведены результаты статической градуировки термоанемометра при различных перегревах нити. Исследовано предложенное уточненное уравнение теплового баланса.en_US
dc.publisherДонецький національний технічний університетen_US
dc.subjectтермоанемометрen_US
dc.subjectструктура турбулентностіen_US
dc.subjectградуюванняen_US
dc.subjectрівняння теплового балансуen_US
dc.subjecthot-wire anemometeren_US
dc.subjectturbulence structureen_US
dc.subjectcalibrationen_US
dc.subjectheat balance equationen_US
dc.subjectструктура турбулентностиen_US
dc.subjectградуировкаen_US
dc.subjectуравнение теплового балансаen_US
dc.titleИССЛЕДОВАНИЕ НИТОЧНОГО ТЕРМОАНЕМОМЕТРА ПОСТОЯННОЙ ТЕМПЕРАТУРЫ ПРИ РАЗЛИЧНЫХ ПЕРЕГРЕВАХ НИТИen_US
dc.title.alternativeInvestigation of Constant Temperature Hot-Wire Anemometer at Different Filament Overheatingsen_US
dc.title.alternativeДослідження ниткового термоанемометра постійної температури при різних перегрівах ниткиen_US
dc.typeArticleen_US
Розташовується у зібраннях:Випуск 2 (25)'2013
Наукові публікації кафедри електронної техніки

Файли цього матеріалу:
Файл Опис РозмірФормат 
кузнецов.pdf445,1 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.