Please use this identifier to cite or link to this item:
Title: Identification of material parameters for numerical simulation of the behavior of rocks under true triaxial conditions
Authors: Sakhno, Ivan
Sakhno, Svitlana
Molodetskyi, Andrey
Keywords: finite element method
geomaterial modeling
elastic model
Drucker–Prager model
Issue Date: Oct-2018
Abstract: Purpose. Development a modified model of geomaterials for numerical simulation of the behavior of rocks in a true triaxial stress field. Methodology. The research was conducted on specimens of coal grade “С”. Input parameters of materials for basic models in the modeling by the finite element method were taken from the physical experiment. The experiment was conducted on the installation of true triaxial compression. The results of comparative studies on the behavior of rocks in the true triaxial stress field using the experimental method and numerical mathematical modeling are presented. Modeling is conducted by the finite element method in Ansys Inc software. The results of tests on the strength of coal specimens in generalized compression conditions are taken as in-situ properties. Findings. It is established that use of classical deformation models – the elastic model and Drucker–Prager model – with numerical mathematical modeling of geomechanical processes is in error when describing the behavior of geomaterials in a volumetric field of stress of 30–15 % relative to the experiment. In this case, modeling with the use of an elastic model does not only cause a significant quantitative error, but also fails to reflect the quality of the dependence of the Young module and the volume compression module on average stresses at all stages of the strain. To adequately imitate the model of geomaterials, one must take into account the anisotropy of the elastic modulus, the shear modulus and the coefficient of transverse deformation, as well as the functional dependence of the dilation from the plastic deformation and the coefficient of rigidity. Originality. The Drucker–Prager model was modified by taking into account the anisotropy of coal properties. Depending on the “average stress-average deformation”, the calculation error for the elastic model is 33 %, for the Drucker-Prager model it is 15 %, while for the modified Drucker–Prager model it is 0.14 %. Practical value. Using the results of the study can improve the accuracy of the prediction the stress-strain state of geomechanical objects.
Appears in Collections:Наукові публікації кафедри РРКК

Files in This Item:
File Description SizeFormat 
05_2018_Sakhno.pdf4,2 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.